FRP absorption tower
With the development of modern industry, glass fiber reinforced plastic absorption tower, acid mist absorption tower, exhaust gas absorption tower, and glass fiber reinforced plastic purification tower, preventing environmental pollution has become a common concern. At the same time, comprehensive utilization, turning harmful into beneficial and turning useless into useful, is an important way to save investment, save energy and improve economic benefits. In the surface treatment (pickling, chemical milling, electroplating, etc.) of many metal products, sulfuric acid, hydrochloric acid, nitric acid, etc. are required, so that a certain concentration of acid mist gas will escape, and the content of this acid mist gas exceeds At the time of standardization, human health, the growth of plants and animals, and buildings will cause serious harm, so the country attaches great importance to it. For this reason, I often developed the BJS series acid mist purification tower with the assistance of relevant research institutes. The purification tower is made of glass fiber reinforced plastic and polyethylene. It has the advantages of high purification efficiency, strong corrosion resistance, high strength, low noise, low power consumption, small size, convenient disassembly and maintenance, and beautiful appearance.
There are currently nine types of models: 1.5, 3, 5, 7.5, 10, 20, 30, 40, and 50. The harmful gases processed by BJS type acid mist purification tower are acid mist (H 2 SO 4), hydrogen chloride (HCL), gas and hydrogen fluoride (HF) gas, chromic acid mist (GrO 3), hydrocyanic acid (HCN), hydrogen sulfide (H 2 S), ammonia gas (NH 3), water-soluble gas such as alkali vapor. Sodium hydroxide is used as the absorption neutralization solution, the concentration of the solution is 2 ~ 6%, and the purification efficiency is above 95%.
The glass fiber reinforced plastic absorption tower is made in sections. The outer surface of the tower is made of water-resistant and anti-aging gel coat resin as the anti-aging surface layer. The thickness of the gel coat layer is not less than 0.5mm. Fine cloth is used as the anti-aging coating. Its resin content is not less than 75%. The number of layers is laid according to large technical standards. The resin content is 60 ~ 70%, which makes the tower's strength absolutely reliable.